VICAT APPARATUS WITH ISI CERTIFICATION MARK, IS:5513, FITTED IN ALUMINIUM BOX
TECHNICAL DETAIL
Consistency and Setting-time
Apparatus for determining the normal consistency, standard consistency and time of setting of cement and lime in accordance with IS, ASTM, BS and AASHTO specifications.
Vicat Apparatus With ISI Certification Mark, 15:5513
The equipment consist of the following replaceable parts : Vicat Mould, Glass Base Plate, Initial Needle (in Plastic Case)
Final Needle (in Plastic Case), Consistency Plunger (in Plastic Case), Mild Steel Base Plate, Vicat Mould Split Type, with Clamping Ring
COMPACTION FACTOR APPARATUS
TECHNICAL DETAIL
Ref. Standard IS:5515
A useful tool for determination of workability determination of concrete mixes of very low workability such as those normally used with concrete, compacted by vibration.
Concrete mix having maximum size of aggregate not exceeding 38 mm, can be tested for workability.
Compaction Factor Apparatus is complete with hoppers and receiver assembly, Tamping Rod of 16 mm dia x
60 cm long having a Hooper and two trowels.
CONCRETE MIXER, DRUM TYPE, CAPACITY 30L
TECHNICAL DETAIL
The mixer consisting of a steel vessel of 30 litres, mounted on a frame.
The vessel would rotate at 20-24 RPM with the help of a motor and a pulling.
The vessel can be tilted to any angle by a handle. This facilitates mixing and discharge.
Blades are provided inside the vessel to mix the material thoroughly.
The large handle strip facilitates manual rotation of the drum during power failure.
The drum, handle and motor etc. are mounted on a steel frame.
This model is provided with two large wheels for carting away.
Supplied complete, with motor of 1 HP along with lead wire.
Suitable for operation on 220V,
50Hz, Single Phase, AC supply.
CONCRETE MIXER, DRUM TYPE, CAPACITY 30L
TECHNICAL DETAIL
The mixer consisting of a steel vessel of 30 litres, mounted on a frame. The vessel would rotate at 20-24 RPM with the help of a motor and a pulling. The vessel can be tilted to any angle by a handle. This facilitates mixing and discharge. Blades are provided inside the vessel to mix the material thoroughly. The large handle strip facilitates manual rotation of the drum during power failure. The drum, handle and motor etc. are mounted on a steel frame. This model is provided with two large wheels for carting away. Supplied complete, with motor of 1 HP along with lead wire. Suitable for operation on 220V,50Hz, Single Phase, AC supply.
CONCRETE MIXER PAN TYPE 250L CAPACITY
TECHNICAL DETAIL
Mild steel pan, Maximum grain size of 60mm, rotation speed of 30rpm
Supplied complete, with motor of 1 HP along with lead wire.
Suitable for operation on 220V, 50Hz, Single Phase, AC supply.