FLUIDIZED BED CHARACTERISTICS MAKE : CREATIVE LAB MODEL NO:03
The setup consists of a glass column with fluidizing material i.e. beads, S.S. mesh to support the beads and with calming section. Pressure drop across fluidization can be measured by manometer. The setup studies in fluidization characteristics and relationship between the velocity of the fluid and pressure drop per unit length. The apparatus is close circuit type provided with suitable capacity tank, FHP pump, necessary pipeline valves and a Rotameter to measure the flow rate of fluid. The setup is fitted on a MS frame painted with good quality paint.
To study fluidization characteristics.
To study relationship between velocity of fluid and pressure drop per unit length.
Water Supply and Drain.
Electricity 220 V, 1 Phase.
Floor Area 0.75 m x 0.75 m.
Column Material Borosilicate Glass.
Packing Glass Beads
Water tank Material Stainless Steel, Capacity 30 Ltrs.
Water Circulation FHP Pump, Crompton/Sharp make.
Flow Measurement Rotameter for water
Pr. Drop Measurement Manometer
Instruction Manual will be provided along with the Apparatus
The whole set-up is well designed and arranged in a good quality painted structure.
THICKNER MAKE : CREATIVE LAB MODEL NO:CLMO-19
Industrial sedimentation operations may be carried out batch wise and continuously in equipment called thickener. The equipment is a cylindrical tank with openings for a slurry feed and product draw off. The tank is filled with dilute slurry and slurry is permitted to settle. Continuous thickeners are large diameter, shallow depth tanks with slowly revolving rakes for removing the sludge. The slurry is fed at the center of the tank. Around the top edge of the tank is a clear liquid overflow. The rake serves to scrap the sludge towards the center of the bottom for discharge. The motion of the rake also stirs only the sludge layer. This gentle stirring aids in water removal from the sludge. The set-up consists of several basic components: a tank to contain the slurry, feed piping and a feed well to allow the feed stream to enter the tank, a rotating rack mechanism to assist in moving the concentrated solids to the withdrawal points, an underflow solids-withdrawal system and an overflow launder. A feed tank, feed pump, and feed tank agitator is provided. A bin for collecting concentrated material is also provided.
To study the working of continuous type thickener.
Water Supply and Drain.
Electric Supply: Single phase, 220 V AC, 1.5 kW.
Floor Area 1 m x 1 m.
Slurry (Paper pulp or CaCo3)
Thickner Material Stainless Steel Dia 400 mm, Height 150 mm.
Thickner Agitator SS impeller with SS Shaft coupled to FHP motor with reduction gearbox.
Slurry Tank Material Stainless Steel, Capacity 100 Ltrs.
Slurry Tank Agitator Stainless Steel Impeller with SS Shaft coupled to FHP Motor and Reduction Gear Box
Slurry Feed Pump Gear Pump with FHP motor.
Piping system GI and PVC.
Control panel Comprises of Standard make On/Off switch, Mains Indicator etc.
Instruction Manual An ENGLISH instruction manual will be provided along with the Apparatus
A good quality painted rigid MS Structure is provided to support all the parts.
Prev 1 Next
THICKNER MAKE : CREATIVE LAB MODEL NO:CLMO-19 FLUIDIZED BED CHARACTERISTICS MAKE : CREATIVE LAB MODEL NO:03