MEASUREMENT OF LEVEL BY AIR PURGE METHOD, MUFFLE FURNACE, HEAT TRANSFER BY NATURAL CONVECTION, CONTROL VALVE CHARACTERISTICS (LINEAR, EQUAL AND QUICK OPENING), HOT PLATE WITH STIRRER , manufacturers suppliers in India

HOT PLATE WITH STIRRER

TECHNICAL DETAIL

Construction: A thick gauge Mild Steel (M.S.) body

A thick well machined and smooth cast iron top and grooved from bottom to circulate spiral heaters.

Heating element is housed into the grooves with porcelain beads underneath of the cast iron

Dimension: 20.5 cm

Rating: 1KW

Max. Temp: 300°C with thermostatic controller

Imported auto tuned PID Controller cum Indicator with K type Sensor

Maximum stirring speed-1200 rpm with stepless speed control and good speed stability

CONTROL VALVE CHARACTERISTICS (LINEAR, EQUAL AND QUICK OPENING)

TECHNICAL DETAIL

Three pneumatic control valves i.e. Linear, Equal %

Quick Opening type having size: ½”

Actuator: 15 Sq Inch.

Stroke: 14mm

Input: 3-15 PSIG connected with single column manometer to measure pressure head.

Water circulation by FHP HP Pump of Crompton/Standard make from Water Tank

Capacity 25 liters, 1.2 mm thick to overhead tank, Capacity 10Ltrs, 1.2 mm thick, made of stainless steel 304 grade

Measured by flow sensor with local digital display.

The whole set-up well designed and arranged on a rigid structure painted with industrial PU Paint

HEAT TRANSFER BY NATURAL CONVECTION

TECHNICAL DETAIL

Test Section : Material-Brass, Diameter: 38 mm, Length:500 mm

Heater : Nichrome Wire.

Temperature Sensors : RTD PT-100 type - 8 Nos.

Control panel comprising of PID Controller (0-199.9°C) for heater, electronic Energy meter for power measurement and Digital Temp. Indicator (0-199.9°C) with multi-channel switch, with standard make On/off switch, Mains Indicator etc.

Powder coated duct of MS to accommodate the assembly with front window of Acrylic.

The whole set-up must be well designed and arranged on a rigid structure painted with industrial PU Paint.

MUFFLE FURNACE

TECHNICAL DETAIL

Outer cover made of double walled CRCA sheet, duly epoxy powder coated.

Working temperature up to 1100 oC max. design for max. over shoot temperature up to 1200 oC. soaking time for continues working temp. 1100 oC, max. 8 hours.

Sensor provided will be CHROMEL / ALUMEL Thermocouple, with High temperature ceramic sheathed and back side mounting facility.

Control panel provided at Top of the Muffle furnace with sufficient gap for air pass through & no direct contact of outer body of Muffle furnace with the control panel.

High temperature Muffle Furnace manufactured & designed to work up to 1100 oC, as mention features,

Furnace operating temperature 1200 oC max., with continuous sock time operation 4-6 hrs., at 1100 oC.

Temperature Controller PID Profile with 4 ramp & 4 Soak step control logic.

Control logic with SSR control power pack & PID temperature controller.

Temperature accuracy ± 5 oC. at max. operating temperature.

Furnace heating element is Kanthal A-1 wire wounded over the Muffle for uniform heating.

Uniform heating of 2 kW. capacity. Current rating 8A,

Working Chamber Dimension (Muffle Dimension):100 (W) x 100 (H) x 230 (D) mm.

Over all Dimension approximately 350 (W) x 350 (H) x 450(D) mm ( approx)

MEASUREMENT OF LEVEL BY AIR PURGE METHOD

TECHNICAL DETAIL

A water tank having Diameter 200 mm, Height 500 mm with graduated scale with a bubbler pipe having Length 600 mm, made of stainless steel 304 grade, connected to a U-tube manometer to measure pressure.

Air supply by air pump of compatible capacity with pressure regulator acts as an Air Purging Valve, ¼” BSP & Janatics/ Festo Make.

The whole set-up well designed and arranged on a rigid structure painted with industrial PU Paint

Prev 1 2 3 Next

MEASUREMENT OF LEVEL BY AIR PURGE METHOD MUFFLE FURNACE HEAT TRANSFER BY NATURAL CONVECTION CONTROL VALVE CHARACTERISTICS (LINEAR, EQUAL AND QUICK OPENING) HOT PLATE WITH STIRRER