| Vee bee Consisto meter |
| Material of Construction:Special quality low carbon mild steel with good paint quality Vibrator Table : Min 380*260. Four rubber shock absorbers with A.C. supply motor 415 volts, 3 phase, One metal pot, One slump cone, One swivel arm with metal cone, One graduated rod, One perspex disc. One tamping rod as per IS 1199 |
|
|
|
| Oven |
| Laboratory Electric Oven, with Digital Indicator Cum Controller with Safety Alarm, range 50° to 250°C +/-1°C with Air Circulating Fan, S.S. Inside Minimum Size 450 x450 x 450mm |
|
|
|
| Flow Table |
| Motorised, Ref IS:- IS:1199-1959.The Flow Table top should be min. 76.2 cm dia, finely machined from a solid brass casting. The stand is a of cast iron and is of sturdy construction, Holes for mounting on foundations are drilled in the base plate. Ground and
hardened steel cam is designed to drop the table by 12.5 mm with an electric geared motor (One separate Motor Unit complete with a reduction gear) with Min. 100 RPM, The equipment is supplied along with flow mould (The min. base internal diameter is 25 cm, top internal diameter is 17 cm and the height is 12 cm) and tamping rod (made of steel, 16mm in diameter, 60 cm long and rounded at the one end). Suitable for operation with 220 volts, 50 Hz, single phase, AC Supply. |
|
|
|
| Cylindrical Moulds |
| Cast Iron, Split Lengthwise 150mm dia x 300mm high with baseplate and top plate |
|
|
|
| Cube Moulds |
| Cast Iron, for 150mm Cube with ISI Certification IS:10086
Angle between adjacent interior faces and between interior faces and top and bottom plates of mould-90+/-0.5Deg
length of base plate -Min. 280mm
Width of base plate -Min. 215mm
Machined flat to +/- 0.02 mm of accuracy and finished to within +/- 0.2 mm of specified dimensions. Approx wt minium to14kg |
|
|
|
| Prev 1 2 3 4 5 6 7 Next |
| Cube Moulds Cylindrical Moulds Flow Table Oven Vee bee Consisto meter |
