Ref. Standard- IS:1199, IS:10079, BS:1881 , EN 12350-7
Capacity 0.005 m3 (5 litres), suitable for aggregate size upto 38 mm
It consists of a pressure-tight flanged cylindrical measuring bowl, fitted with a removable flanged and a conical cover assembly with a seal in-between.
The conical cover has an air valve and a pet cock for bleeding-off the water. A cylindrical stand pipe, which is graduated in per cent air content, is fixed on the conical cover assembly.
Required pressure is applied to the specimen with the help of a pressure bulb. The whole assembly is mounted on a flat base.
Each apparatus is supplied complete with a calibrating cylinder, pressure gauge,
funnel, trowel and tamping bar.
CONCRETE MIXER, DRUM TYPE, CAPACITY 30L
TECHNICAL DETAIL
The mixer consisting of a steel vessel of 30 litres, mounted on a frame.
The vessel would rotate at 20-24 RPM with the help of a motor and a pulling.
The vessel can be tilted to any angle by a handle. This facilitates mixing and discharge.
Blades are provided inside the vessel to mix the material thoroughly.
The large handle strip facilitates manual rotation of the drum during power failure.
The drum, handle and motor etc. are mounted on a steel frame.
This model is provided with two large wheels for carting away.
Supplied complete, with motor of 1 HP along with lead wire.
Suitable for operation on 220V,
50Hz, Single Phase, AC supply.
CONCRETE MIXER, DRUM TYPE, CAPACITY 30L
TECHNICAL DETAIL
The mixer consisting of a steel vessel of 30 litres, mounted on a frame. The vessel would rotate at 20-24 RPM with the help of a motor and a pulling. The vessel can be tilted to any angle by a handle. This facilitates mixing and discharge. Blades are provided inside the vessel to mix the material thoroughly. The large handle strip facilitates manual rotation of the drum during power failure. The drum, handle and motor etc. are mounted on a steel frame. This model is provided with two large wheels for carting away. Supplied complete, with motor of 1 HP along with lead wire. Suitable for operation on 220V,50Hz, Single Phase, AC supply.
CONCRETE MIXER PAN TYPE 250L CAPACITY
TECHNICAL DETAIL
Mild steel pan, Maximum grain size of 60mm, rotation speed of 30rpm
Supplied complete, with motor of 1 HP along with lead wire.
Suitable for operation on 220V, 50Hz, Single Phase, AC supply.
PULL OUT BOND TEST FOR CONCRETE
TECHNICAL DETAIL Digital Rebar Pull-Out Force Tester with Steel Hydraulic Cylinder, 30 tons capacity, with LPI batter
PULL OUT BOND TEST FOR CONCRETE CONCRETE MIXER PAN TYPE 250L CAPACITY CONCRETE MIXER, DRUM TYPE, CAPACITY 30L CONCRETE MIXER, DRUM TYPE, CAPACITY 30L AIR ENTRAINMENT METER