HUMIDIFICATION & DEHUMIDIFICATION APPARATUS MAKE :CREATIVE LAB MODEL NO:CLMT-28, ION EXCHANGE APPARATUS MAKE : CREATIVE LAB MODEL NO:CLMT-, ADSORPTION IN PACKED BED MAKE : CREATIVE LAB MODEL NO:CLMT-26, MASS TRANSFER WITH AND WITHOUT CHEMICAL REACTION MAKE : CREATIVE LAB MODEL NO:CLMT-24, manufacturers suppliers in India

MASS TRANSFER WITH AND WITHOUT CHEMICAL REACTION MAKE : CREATIVE LAB MODEL NO:CLMT-24

DESCRIPTION:

The setup consists of a Reactor, in which solid cylinder of Benzoic Acid is placed and is stirred by means of a variable speed mixer. Baffles are also provided. The Reactor is made of Stainless Steel. Peltilizer is provided to make the solid cylinder of Benzoic Acid. Constant temperature water bath arrangement is provided to conduct the experiment at various temperatures.

EXPERIMENTATION:

Dissolution of Benzoic acid in water: Kinetic studies

Dissolution of Benzoic acid with reaction in aqueous NaOH solution.

UTILITY REQUIRED:

Water Supply.

Drain.

Electricity Supply: 1 Phase, 220 V AC, 0.5 kW.

Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

TECHNICAL DETAIL:

Reactor Material Stainless Steel, Capacity 2 Ltrs. (approx)

Water Bath Material Stainless Steel, Double Wall, insulated with ceramic fibre wool.

Heater Nichrome Wire Heater

Stirrer Stainless Steel Impeller and shaft coupled with DC motor & drive for variable speed.

Temperature Sensors RTD PT-100 type.

Control panel comprises of

RPM Indicator Digital, Non contact type.

Digital Temp. Controller 0-199.90C for hot water tank.

With Standard make on/off switch, Mains Indicator & fuse etc.
Instruction Manual An ENGLISH instruction manual will be provided along with the Apparatus

The setup is provided with Peltilizer.

The whole unit is assembled rigidly on a base plate.

The whole setup is well designed and arrangement in a good quality painted structure.

ADSORPTION IN PACKED BED MAKE : CREATIVE LAB MODEL NO:CLMT-26

DESCRIPTION:

The set up consist of three vertical column packed with activated Charcoal. Columns are operated individually. Liquid feed with dye is fed to the individual column from the bottom and samples are collected from the top at regular interval of time. Rotameter is provided to measure the flow rate. Pump with a feed tank is provided for fluid flow.

EXPERIMENTATION:

To obtain the breakthrough curve and hence length of unused bed for the given adsorption system.

UTILITY REQUIRED:

Electricity Supply : 1 Phase, 220 V AC, 0.5 kW

Bench Area: 1.2m x 1m.

Required Chemicals & Laboratory Glassware.

Colourimeter.

Required analyzing equipments as per the system to study.

TECHNICAL DETAIL:

Column (3 Nos.) Material Borosilicate glass of different dia.

Feed tank Material Stainless Steel, Capacity 20 litres.

Receiving tank Material Stainless Steel, Capacity 20 litres.

Feed circulation FHP, Magnetic Pump made of Polypropylene.

Piping Stainless Steel and PVC of size ¼.

Flow measurement Rotameter for feed.

Stop Watch Electronic.

Instruction Manual An ENGLISH instruction manual will be provided along with the Apparatus

The whole set-up is well designed and arranged in a good quality painted structure.

ION EXCHANGE APPARATUS MAKE : CREATIVE LAB MODEL NO:CLMT-

DESCRIPTION:

The setup consists of two glass columns packed with Cation and anion exchange resins and one feed tank. Water is fed to the columns through feed tank with the help of a pump. The flow rate can be adjusted by operating the valve provided. Samples can be taken periodically from the top outlet of column.

EXPERIMENTATION:

To study the ion exchange apparatus.

UTILITY REQUIRED

Water Supply.

Drain.

Electricity Supply: 1 Phase, 220 V AC, 5-15 amp sockets.

Instruments, Laboratory Glassware and Chemicals required for analysis as per the system adopted.

TECHNICAL DETAIL

Columns Material Borosilicate Glass. Packed with cation and anion exchange resins.

Water Tank Material Stainless Steel of suitable capacity.

Water Circulation FHP Pump

Control panel comprises of With Standard make on/off switch, Mains Indicator etc.

Instruction Manual An ENGLISH instruction manual will be provided along with the Apparatus

The whole unit is assembled rigidly on a base plate and mounted on a stand.

Most of the parts are powder coated and rests are painted with auto paints

HUMIDIFICATION & DEHUMIDIFICATION APPARATUS MAKE :CREATIVE LAB MODEL NO:CLMT-28

DESCRIPTION:

The set up consists of a glass column. Water is fed at the top of the column along the walls to make the column a wetted wall column. Hot air from heating chamber with known humidity is allowed to pass through the column vertically upward and evaporation in the liquid film around the wall takes place. The flow rates of water and air can be independently varied to simulate different conditions. Instrumentation is provided to measure the dry and wet bulb temperatures at air inlet and outlet.

EXPERIMENTATION:

To determine the gas film coefficient in a wetted wall column using air-water system.

To find the mass transfer coefficient.

UTILITIES REQUIRED:

Compressed Air Supply at 2 Bar, 4 CFM.

Water supply.

Drain.

Electricity Supply: 1 Phase, 220 V AC, 0.5 kW.

TEHNICAL DETAILS:

Column Borosilicate Glass Dia 45 mm, Length 1000 mm (approx.)

Water Circulation FHP Pump.

Water Tank Material Stainless Steel, Capacity 20 Ltrs.

Heating Chamber Compatible capacity.

Heater Nichrome wire heater

Rotameter For water flow rate measurement.

Dry & wet Bulb Temp. With Digital Temperature Indicator.

Temperature Sensors RTD PT-100 Type.

Control panel comprises of

Digital Temp. Indicator 0-199.90C, RTD PT-100 type with multi-channel switch. Standard make on/off switch, Mains Indicator etc.

Instruction Manual An ENGLISH instruction manual will be provided along with the Apparatus.

The whole set-up is well designed and arranged in a good quality painted structure.

Prev 1 2 3 4 5 Next

HUMIDIFICATION & DEHUMIDIFICATION APPARATUS MAKE :CREATIVE LAB MODEL NO:CLMT-28 ION EXCHANGE APPARATUS MAKE : CREATIVE LAB MODEL NO:CLMT- ADSORPTION IN PACKED BED MAKE : CREATIVE LAB MODEL NO:CLMT-26 MASS TRANSFER WITH AND WITHOUT CHEMICAL REACTION MAKE : CREATIVE LAB MODEL NO:CLMT-24