LENGTH GAUGE, LOSSES DUE TO FRICTION IN PIPE LINES , DISCHARGE THROUGH ROTAMETER, DISCHARGE OVER NOTCHES APPARATUS , Universal Automatic Compacter, manufacturers suppliers in India

Universal Automatic Compacter

Universal Automatic Compactor with Mild Steel compaction mould as per IS
Ref Standard IS:2720 (Part 7 & 8) Motor driven mechanical compactor,useful for soil compaction in 100 mm or 150 mm dia moulds.
Rammer - Circular faced 50mm dia adjustable to 2.6kg or 4.9kg weight.
Drop - Adjustable to 310mm or 450mm.
The equipment is suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.

DISCHARGE OVER NOTCHES APPARATUS

MAKE: CREATIVE LAB
MODEL NO: -CLFM-03

DESCRIPTION:

The setup consists of a channel having sufficient length and width in which water is supplied from the bottom. Required Notch is fitted at one end of this channel. A pointer gauge with Vernier scale is fitted to measure the height of fluid in flow channel. Arrangement for fixing interchangeable notches is made. Set of three notches, i.e. rectangular notch, 600 V notch & 450 V notch is provided along with the set-up. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stopwatch.

EXPERIMENTATION:

To determine co-efficient of discharge (Cd) through:

V notch 45°

V notch 60°

Rectangular Notch.

UTILITIES REQUIRED:

Water Supply.

Drain.

Electricity 0.5 kW, 220V AC, Single Phase.

Floor Area 1.5 x 0.75 ml

TECHNICAL DETAIL

Channel Test Section Size 600 x 300 x 300 mm.

Notches Material Brass Rectangular Notch 45° V Notch 60° V Notch

Pointer Gauge with Vernier scale.

Water Circulation FHP Pump Crompton/ Kirloskar/Standard makes.

Flow Measurement Using Measuring Tank with Piezometer, Capacity 25 Liters.

Sump Tank Capacity 50 Liters.

Stop Watch Electronic.

Control Panel Comprises of Standard make On/Off Switch, Mains Indicator, etc.

Tanks and Channel will be made of Stainless Steel.

The whole set-up is well designed and arranged in a good quality painted structure.

Instruction manual will be provided along with the Apparatus.

DISCHARGE THROUGH ROTAMETER

MAKE : CREATIVE LAB
MODEL NO: CLFM-09

DESCRIPTION:

The apparatus consists of a pipe line contains a Rota meter. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank & stop watch.

EXPERIMENTATION:

To measure discharge through Rotameter and calibrate it.

UTILITIES REQUIRED:

Electricity supply: Single Phase, 220 V AC, 50 Hz, 5-15 amp combined socket with earth connection.

Water Supply (Initial Fill).

Floor Drain required.

Floor Area Required: 1.5 m x 0.75 m.

TECHNICAL DETAILS:-

Rotameter : Compatible Range.

Water Circulation : 0.5 HP Pump, Crompton/kirloskar makes.

Flow Measurement : Using Measuring Tank (Capacity 25 ltrs.)

Stop watch ; Electronic.

Sump Tank : Capacity 50 Ltrs.

Control Panel Comprises of : Standard makes ON/Off Switch, Mains Indicator, etc.

Instruction Manual : An ENGLISH instruction manual will be provided along With the Apparatus

Tanks will be made of Stainless Steel.

The whole set-up is well designed and arranged in a good quality painted structure.

LOSSES DUE TO FRICTION IN PIPE LINES

MAKE: CREATIVE LAB
MODEL NO: CLFM-05

DESCRIPTION:

The setup consists of 2 pipes of different diameters, which are connected in parallel. Pressure tapings are provided on each pipe to measure the pressure losses with the help of a Differential Manometer. Control valves are fitted on each pipe, which enables to use one pipe at a time for experiment. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve And by-pass valve are fitted in water line to conduct the Experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

EXPERIMENTATION:

To determine the losses due to fiction in pipes.

To determine the friction factor for Darcy Weisback

equation.

UTILITIES REQUIRED:

Water Supply.

Drain.

Electricity 0.5 kW, 220V AC, Single Phase.

Floor Area 1.5 x 0.75 m.

TECHNICAL DETAIL

Pipe Test Section

Dia ½”, Length: 1m, Material G.I.

Dia ¾”, Length: 1.25m, Material G.I.

Water Circulation 0.5 HP Pump, Crompton/Kirloskar/G.E makes.

Flow Measurement Using Measuring Tank with Piezometer, Capacity 25 Liters.

Sump Tank Capacity 50 Liters.

Stop Watch Electronic.

Control Panel Comprises of Standard makes On/Off Switch, Mains Indicator, etc.

Instruction manual will be provided along With the Apparatus.

Tanks will be made of Stainless Steel.

The whole set-up is well designed and arranged in a good quality painted structure.

LENGTH GAUGE

DESCRIPTION

Used for determining the flakiness index of aggregates.It consists of a frame with a sliding panel.

Conforms to IS: 2386 (Part I).

Metal plate made of steel having slots. Mounted on a hardwood base

Prev 41 42 43 44 45 46 47 48 Next

LENGTH GAUGE LOSSES DUE TO FRICTION IN PIPE LINES DISCHARGE THROUGH ROTAMETER DISCHARGE OVER NOTCHES APPARATUS Universal Automatic Compacter