TECHNICAL DETAIL
speeds between 0.00048 mm/min and 6.00 mm/min.
Maximum Platen dia :- 198mm Tri-axial Cell , Stationary Bushing,38mm dia:-
Ref Standard: IS : 2720 (Part XII)
For testing specimen of size 38mm dia x 76mm long.
• Triaxial Cell consists of Perspex chamber with anvil and loading plunger
• The cell is easily split by releasing four type rods.
• It is leak proof upto 10 bar (10 kg/cm2) fluid pressure.
• An oil plug and an air vent are provided for introducing a thin layer of oil over water. This provides effective sealing at the plunger for long duration tests.
• The cell is fitted with four sleeve packed valves of no volume change type of base.
Cell Consisting of followings:-
• Top loading pad, Perspex, 38 mm dia. 1 No.
Plain Perspex disc 38mm dia x 6 mm thick 1 pair.
Porous Stone 38mm dia x 6 mm thick. 1 pair.
Sheath stretcher for 38 mm dia specimen 1 No.
Two way split former for 38 mm dia specimen 1 No.
Rubber sheath for 38 mm dia specimen 12 Nos.
Drainage tube (short), 38 mm 4 Nos.
Drainage tube (long), 38 mm 4 Nos.
“O’ rings for 38mm dia specimen 4 Nos.
Split Mould, 38mm dia 1 No.
Top loading pad 38mm (plain) 1 No.
Max Pressure - 12kg/cm2 .
oil pump - 1
variable pressure - 16 bar pressure
Suitable for operation on 220 V, 50 Hz, Single Phase,AC supply.
•Pressure Transducer, 20 bar (20 kg/cm2) capacity, an
LVDT (Displacement Sensor) having a range of 0-
20mm mm and a 3 - Channel Digital Indicator Digital Indicator :- Mode of Display : Micro controller multi line
alpha numeric VFD display
for all simultaneous channel
Power supply Voltage : 220V, 50Hz, Single Phase Load cell:- Capacity : 10 kN
Load Cell excitation : 5 V, DC |
