• Two pillar type.

 • Horizontal Clearance-265mm min

 • Vertical clearance-700mm min

 • Maximum Platen dia-130mm with Hardness of material(platen): 60 RHC. 

 • Ram Dia 50mm

 • The lower platen moves up and down

 • A dial gauge mounting bracket is provided on one of the two pillars.

 • Suitable for operation on 220 V, 50 Hz, single phase,AC supply

 Paint quality:-Powder coating 70-80 micron thick

 Material of Construction: Special quality low carbon mild steel

 Mould - MS150mm ID x 175 mm H, Perforated Base Plate - MS

 Extension Collar - MS150 mm ID x 50 mm high

 Penetration Piston 50 mm face dia

 Circular Metal Spacer Disc, with detachable handle, 148 mm dia x 47.7 mm high,

 Annular Metal Weight 2.5 kg, 147 mm dia with 53 mm dia central hole

 Slotted Metal Weight 2.5 kg, 147 mm dia, with 53 mm dia slot Rammer 2.6 kg, 310 mm controlled drop

 Rammer 4.9 kg, 450 mm controlled drop

 Proving Ring Capacity 50 kN

 Dial Gauge 25 mm travel, 0.01 mm least count.

 Load frame pillar thread M30 X 600mm.

 Suitable for operation on 220 V, 50 Hz, single phase, AC supply.

As per the IS:2720 (Part 30) with special motor, Rotation 0.10/sec. 

 Rate of rotation : 1/60 rpm

 Suitable for operation on 220 V, 50 Hz, Single Phase,

 AC supply. Container 1 No.Set of 4 Springs, (one each of capacity 2 kg-cm, 4 kg-cm, 6 kg-cm and 8 kg-cm min)

As per the IS:2720 (Part 2)

 The speed of drying (about 30 min), The infrared radiation is controlled by a

 voltage regulator. The instrument is provided with an indicator lamp. The balance scale (drum) is divided in terms of moisture percentage on wet weight basis, which are read directly

 from it. Graduations are from 0 to 100% in 0.2 % divisions.

 Suitable for operation on 220 V, 50 Hz, Single phase,AC Supply.

 Capacity : min 5g approx.

 Sensitivity : min 10 mg approx.

 Range : 0 to 100% moisture content

 on wet weight basis.

 Reading accuracy : min ± 0.20%

 Probable error : min ± 0.25% in the lower range upto compared to 25% and ± 1% for moisture contents

 Oven methods : above 50% Equipment consisiting of :- Infra Red Lamp

 Thermometer (L-shaped)

Microprocessor based load frame 2 kN Capacity with proving ring and dial gauges ,with related software 

 Ref. Standards IS :11229, 2720 (Part 13) 

 Supplied complete with carriage, loading hanger and 10:1 lever loading device. Suitable for specimens of size 60×60×25mm. Membrane keypad and the 40×2 LCD display. Precision loading rate of 0.00001 to 9.99999mm / minute.

 Suitable for operation on 220 V, 50 Hz, Single phase, AC Supply. Microprocessor control

 Accepts specimen 60mm square

 Shear Box Assembly, This assembly comprises of :

 Halves of the Shear Box 2 Nos.

 Plane Gripper Plate - 2 

 Perforated Gripper Plate - 2 

 Porous Stone - 2 

 Top Loading Pad - 1 

 Base Plate - 1

 Specimen Cutter - 1 

 Min normal stress - 3 kg/cm2 

 Operation : Motorised

 Variable Rates of Strain

 Specimen Size : 60 x 60 x 25 mm

 Compression - Tension Proving Min Ring, 2 kN capacity 

 Dial Gauge - 2