logo
 
left right
shadow
SHEAR CENTRE APPARATUS MAKE : CREATIVE LAB MODL NO:CLSL-07
DESCRIPTION
Apparatus consists of sturdy base frame and Channel, Equal angle, Semicircle and Z-Section are supplied with apparatus. Standard length of each of the four sections in M.S. is supplied. Each is provided with end clamp for fixing to the rigid bracket. A special load hanger is provided so as to change the load position so that with the help of two dial gauges the vertical plane of Shear centre for the particular section can be determined. 
Range of Experiments
Determination of the vertical plane of shear center for different cross sections commonly used for structures.

SUSPENSION BRIDGE APPARATUS MAKE :CREATIVE LAB MODEL NO:CLSL-08

DESCRIPTION
Apparatus consists of two mild steel cables 0.5cm diameter in cross section and 150cm long, pinned to two supports 90cm apart situated symmetrically. One of the ends can be converted to a roller by applying a known load at the end with the help of suspended pulley system. Vertical loads can be applied at various points along the span of the beam. A dial gauge with 25mm travel (with a magnetic base) will be supplied with the apparatus. Apparatus will be supplied complete with a supporting stand and a set of weights.



PORTAL FRAME APPARATUS MAKE : CREATIVE LAB MODEL NO:CLSL-09
DESCRIPTION
Apparatus made up of M.S. plate of rectangular section of 3mm thick X 40cm wide. Frame is provided with a provision to achieve different end conditions viz. hinged, roller & fixed. The size of portal will be 40cm X 60 cm. Portal may also have a provision for pulley arrangement and hook arrangement for horizontal loading at different positions. A dial gauge with 25mm travel (with a magnetic base) is supplied with the apparatus. Apparatus will be supplied complete with a supporting stand and a set of weights.
 

REDUNDANT JOINT APPARATUS MAKE : CREATIVE LAB MODEL NO:CLSL-10

DESCRIPTION
Apparatus consists of three suspension members (spring balances) of different stiffness which are jointed at a point to form the redundant joint. The upper end of the suspension members being tied in a position to a vertical wooden board. Arrangement is provided to apply a vertical load at the joint and to measure its horizontal and vertical displacement on a paper and also elongations and forces in the suspension members by the help of dial gauges. Two dial gauges with 25mm travel (with magnetic bases) are supplied with the apparatus. Apparatus will be supplied complete with a supporting stand and a set of weights.

 



TWO HINGED ARCH APPARATUS MAKE : CREATIVE LAB MODEL NO:CLSL-11

 DESCRIPTION
Apparatus has a span of 100cm and rise 25cm. Both ends should have hinge but one of the ends should also be free to move longitudinally. A lever arrangement fitted at this end for the application of known horizontal inward force for measuring the horizontal thrust. Along the horizontal span of the arch various points are marked at equidistant for the application of load. This being a statically indeterminate structure of the first degree. A dial gauge with 25mm travel (with magnetic base)will be supplied with the apparatus. Mild steel apparatus will complete with a supporting stand and a set of weights.

 



Prev   1  2  3   Next
TWO HINGED ARCH APPARATUS MAKE : CREATIVE LAB MODEL NO:CLSL-11    REDUNDANT JOINT APPARATUS MAKE : CREATIVE LAB MODEL NO:CLSL-10    PORTAL FRAME APPARATUS MAKE : CREATIVE LAB MODEL NO:CLSL-09    SUSPENSION BRIDGE APPARATUS MAKE :CREATIVE LAB MODEL NO:CLSL-08    SHEAR CENTRE APPARATUS MAKE : CREATIVE LAB MODL NO:CLSL-07    
Categories
  HIGHWAY ENGINEERING LAB
 APPLIED MECHANICS LAB
 CHEMICAL REACTION ENGINEERING LAB
 CIVIL ENGINEERING LAB
 CIVIL LAB EQUIPMENTS
 CONCRETE LAB
 CORE LAB
 ELECTRICAL ENGINEERNG LAB EQUIPMENTS
 ELECTRONICS ENGINEERING LAB EQUIPMENTS
 ELECTRONICS LAB
     ADVANCED COMMUNICATION LAB
 ENVIRONMENT LAB
 ENVIRONMENTAL ENGINEERING LAB
 FLUID MACHINERY LAB
 FLUID MECHANICS LAB
 GEOLOGY LAB
 GEOTECHNICAL ENGINEERING LAB
 HEAT TRANSFER LAB
 HYDRAULIC BENCH & ACCESSORIES
 MASS TRANSFER LAB
 MATERIAL TESTING & CONCRETE LAB
 MATERIAL TESTING LAB
 MECHANICAL OPERATION LAB
 MEDICAL LAB EQUIPMENTS
     ANALYTICAL LAB EQUIPMENT
 METALLURGICAL & MATERIAL SCIENCE LAB
 MOMENTUM TRANSFER LAB
 MONENTUM TRANSFER LAB
 PETROLEUM TESTING LAB
 PHYSICS LAB
 PHYSICS LAB
 PROCESS CONTROL & INSTRUMENTATION LAB
 PRODUCTION LAB
 REFRIGERATION & AIR CONDITIONING LAB
 STRENGHT OF MATERIAL LAB
 STRUCTURE LAB
 SURVEY LAB
 SURVEYING & GEOMATICS LAB
 THEORY OF MACHINE LAB
 THERMODYNAMICS LAB
 TRANSPORTATION & HIGHWAY ENGINEERING LAB
 WORKSHOP
 
Follow us on
facebook twitter in  
 
bottom
 
Home About us Products Enquiry Contact us