logo
 
left right
shadow
MX Road Software
TECHNICAL DETAIL 
 Bentley MXROAD is an advanced, string-based modeling tool that enables the rapid and accurate design of all road types. With MXROAD you can quickly create design alternatives to achieve the “ideal” road system. Upon selection of the final design alternative, MXROAD automates much of the design detailing process, saving the user time and money.

Specific Gravity and Water absorption
Density Basket, A wire basket of not more than 6-3 mm mesh or a perforated container of convenient size 20 cm dia x 20 cm high with wire hangers not thicker than one millimetre for suspending it from the balance. 
 Balance -A balance or scale of capacity not less than 3 kg
 Suitable for operation on 220 V, 50 Hz, Single phase, AC supply.
 A container for filling water and suspending the basket.
 A shallow tray and two absorbent clothes, each not less than 75x45cm.
 1. A thermostatically controlled oven to maintain temperature at 100-110° C.

Centrifuge Extractor
 Speed control up to 3600 r.p.m. at 50 or 60 Hz by AC drive.
 Stable and silent throughout the test
 Accurate determination of bitumen percentage.
 Each unit is supplied complete with a set of 25 Filter Paper Discs.
 Suitable for operation on 220 V, 50 Hz, Single Phase, AC supply.
 The centrifuge is a cast aluminium rotor bowl, mounted on a vertical shaft and enclosed inside a leak tight housing.
 Conforms to ASTM D 2172, AASHTO T-58

Ultra sonic Pulse Velocity Instrument
 High performance, microprocessor based instrument that measures velocity , transit time & other parameters. The Ultrasonic Pulse Velocity instrument should supplied complete with;
 Two 54 KHz transducers (Transmitter and Receiver) with 3 m cable, Calibration rod Coupling agent (250 mm). Standards and Norms: EN12504-4 and IS13311.

Digital Compression Testing Machine
 Digital Compression Testing Machine: Capacity Min: 2000kN with touch screen display with TFT with Min. 800 X 480 Pixel. Real time display of time Vs Load in Kn/Mpa. Least count:- Min. 0.1KN, Maximum Clearance Between Platens:-370mm; Maximum Distance Between Side Plates:-340mm; Platen Size:-Min. 222.0 Dia, Piston Dia:-Min. 222.2mm Piston Stroke:-50mm; Hydraulic System: With 15 liters. Control System:- Microprocessor based, pace rate control option must be incorporated through lever. Auto shut down facility. Should consist of parfex glass fixed safety door on the front and back. Calibration & validation:- machine must be with NCCBM/NABL calibration certificated with traceability certificate. Digital Indicator has provision to configure more than one Mode. Mode1-Compression/Mode2-Flexure/Mode3- Prism Testing/Mode4-Tensile Splitting strength. Communication with software support. Machine should supplied with followings:- 1)Loading Unit consisting of Loading Frame with Jack, Dust Cover &Upper Platen. 2) Pumping Unit 3)E.D.I- Touch Screen 4)Spacer with Locating Pin:-4 Nos 5) Step Pin with
 Ring:- 1 No 6) Flexible Hose Pipe:- 1 No 7) Hydraulic Oil:- 15 Ltrs 8) Lifting Handle
 for Ram:- 1 No 9) Spanner 24 x 27:- 2Nos .10) Allen Key 3mm:- 1 No 11)Main cable for
 EDI:- 1No 12) Control motor cable:- 1 No .13)Eye Hook:- 1 No .14) Dust Cover:- 1 No 15) Calibration Certificate- 1 No 16)Operating Manual:- 1 No

Prev   1  2  3  4  5   Next
Digital Compression Testing Machine    Ultra sonic Pulse Velocity Instrument    Centrifuge Extractor     Specific Gravity and Water absorption    MX Road Software    
Categories
  HIGHWAY ENGINEERING LAB
 ADVANCED COMMUNICATION LAB
 ANALYTICAL LAB EQUIPMENT
 APPLIED MECHANICS LAB
 AUTOMATION MANUFACTURING LAB
 CHEMICAL REACTION ENGINEERING LAB
 CIVIL ENGINEERING LAB
 CIVIL LAB ALL IN ONE
 CIVIL LAB EQUIPMENTS
 CONCRETE LAB
 CORE LAB
 ELECTRICAL ENGINEERNG LAB EQUIPMENTS
 ELECTRONICS ENGINEERING LAB EQUIPMENTS
 ELECTRONICS LAB
 ENVIRONMENT LAB
 ENVIRONMENTAL ENGINEERING LAB
 FLUID MACHINERY LAB
 FLUID MECHANICS LAB
 GEOLOGY LAB
 GEOTECHNICAL ENGINEERING LAB
 HEAT TRANSFER LAB
 HYDRAULIC BENCH & ACCESSORIES
 IC ENGINE LAB BL
 MANUFACTURING PROCESSES LAB
 MASS TRANSFER LAB
 MATERIAL TESTING & CONCRETE LAB
 MATERIAL TESTING LAB
 MECHANICAL OPERATION LAB
 MEDICAL LAB EQUIPMENTS
 METALLURGICAL & MATERIAL SCIENCE LAB
 MOMENTUM TRANSFER LAB
 MONENTUM TRANSFER LAB
 PETROLEUM TESTING LAB
 PHYSICS LAB
 PHYSICS LAB
 PROCESS CONTROL & INSTRUMENTATION LAB
 PRODUCTION LAB
 REFRIGERATION & AIR CONDITIONING LAB
 STRENGHT OF MATERIAL LAB
 STRUCTURE LAB
 SURVEY LAB
 SURVEYING & GEOMATICS LAB
 THEORY OF MACHINE LAB
 THERMODYNAMICS LAB
 TRANSPORTATION & HIGHWAY ENGINEERING LAB
 WORKSHOP
 
Follow us on
facebook twitter in  
 
bottom
 
Home About us Products Enquiry Contact us