PH METER , BATCH CRYSTALLIZER, COMBINED FLOW REACTOR (COMPRESSED AIR FEED SYSTEM), PRESSURE DROP IN TWO PHASE FLOW (With Data Logging Facility), MEASUREMENT OF LEVEL BY AIR PURGE METHOD, manufacturers suppliers in India

MEASUREMENT OF LEVEL BY AIR PURGE METHOD

TECHNICAL DETAIL

A water tank having Diameter 200 mm, Height 500 mm with graduated scale with a bubbler pipe having Length 600 mm, made of stainless steel 304 grade, connected to a U-tube manometer to measure pressure.

Air supply by air pump of compatible capacity with pressure regulator acts as an Air Purging Valve, ¼” BSP & Janatics/ Festo Make.

The whole set-up well designed and arranged on a rigid structure painted with industrial PU Paint

PRESSURE DROP IN TWO PHASE FLOW (With Data Logging Facility)

TECHNICAL DETAIL

A glass column having Dia. : 25.4 mm,

Length 900mm made of Borosilicate Glass.

Water Circulation by FHP Pump, Crompton/ Sharp make from water tank made of Stainless steel 304 grade, 1.2 mm thick, capacity 60 liters.

Air and water flow rate measured by using flowsensors with local digital display.

Pressure drop measurement one by using Differential pressure transmitter.

Buffer tank with safety valve & pressure gauge and separator made of Stainless steel 304 grade.

All the ball Valves should be imported. Operating temperature range should be -40°F to 302°F, Working pressure of valve should be in range of 600psi & valves use in vacuum pressure up to 2x10-5 psi.

High speed Data Acquisition system, model NI-USB 6001, National Instruments Make with 16 Inputs, Multifunction I/O, compact DAQ card.

The whole set-up well designed and arranged on a rigid structure painted with industrial PU Paint

COMBINED FLOW REACTOR (COMPRESSED AIR FEED SYSTEM)

TECHNICAL DETAIL
PFR followed by CSTR type: Helical Coiled Tube Type PFR of Volume 0.6-0.7 Ltrs and CSTR of Capacity 2 Ltrs made of Stainless Steel 304 Grade.

CSTR Stirrer of Stainless Steel Impeller and shaft coupled with FHP motor.

Feed Circulation by compressed air from Feed Tanks, 1.2 mm thick, capacity 20 liters each, made of stainless steel 304 Grade

Flow Measurement by Rotameter.

Piping should be of Stainless Steel and PU pipe.

Bourdon type pressure gauge of 0-2 Kg/cm2 and Pressure Regulator of 0-2 Kg/cm2

The whole set-up well designed and arranged on a rigid structure painted with industrial PU Paint.

BATCH CRYSTALLIZER

TECHNICAL DETAIL
Jacketed Crystallizer having conical bottom, capacity 2 Ltrs. Stainless Steel 304 Grade with Variable Speed Stirrer.

Cooling Water Tank of Capacity 30 Ltrs. with FHP pump, Receiving Tank of Capacity 2 Liters. with sieve made of Stainless Steel 304 Grade and flow measured by Rotameter.

Nichrome wire heater should be provided to prepare saturated solution.

Temperature Sensors RTD PT-100 type with digital Temperature Indicator, 0-199.9á´¼C with multi-channel switch.

The whole set-up well designed and arranged on a rigid structure painted with industrial PU Paint.

PH METER

TECHNICAL DETAIL

PH meter with digital display

PH range 0 – 14

Millivolt Range : 1 to ± 1999mV

Resolution : 0.01 pH & 1 mV in mV mode

Repeatability: ± 0.01 pH, ± 1

Digit for pH : ± 1 mV in mV

Mode, ± 1 digit for mV

Slope correction: 85% to 115%

Table model with Probe and Automatic Temp. Compensation

Prev 1 2 3 4 5 6 Next

PH METER BATCH CRYSTALLIZER COMBINED FLOW REACTOR (COMPRESSED AIR FEED SYSTEM) PRESSURE DROP IN TWO PHASE FLOW (With Data Logging Facility) MEASUREMENT OF LEVEL BY AIR PURGE METHOD