High accurate weighing results, fast and stable, easy to operate Electronic Balance, capacity min.: 20kg±2g

LCD Display white backlit or Green color Stainless steel pan

Electronic Balance, Capacity min.: 100kg±10g Material   Stainless Steel Usage/Application Weighing

Capacity 100kg±10g

Accuracy 99.99% Automation Grade Automatic Display Type LED Display Display Digit 6 Digit Frequency 50 Hz

Power Source Electronic

Digital Compression Testing Machine: Capacity Min: 2000kN with touch screen display with TFT with Min. 800 X 480 Pixel. Real time display of time Vs Load in Kn/Mpa. Least count:- Min. 0.1KN, Maximum Clearance Between Platens:-370mm; Maximum Distance Between Side Plates:-340mm;

Platen Size:-Min. 222.0 Dia, Piston Dia:-Min. 222.2mm Piston Stroke:-50mm; Hydraulic System: With 15 liters. Control System:- Microprocessor based, pace rate control option must be incorporated through lever. Auto shut down facility. Would consist of parfex glass fixed safety door on the front and back. Calibration & validation:- machine must be with NCCBM/NABL calibration certificated with traceability certificate. Digital Indicator has provision to configure more than one Mode. Mode1- Compression/Mode2 Flexure/Mode3- Prism Testing/Mode4-Tensile Splitting strength. Communication with software support. Machine would supplied with followings:-

Loading Unit consisting of Loading Frame with Jack, Dust Cover &Upper Platen.

Pumping Unit

E.D.I- Touch Screen

Spacer with Locating Pin:-4 Nos

Step Pin with Ring:- 1 No

Flexible Hose Pipe:- 1 No

Hydraulic Oil:- 15 Ltrs

Lifting Handle for Ram:- 1 No

Spanner 24 x 27:- 2Nos .

Allen Key 3mm:- 1 No

Main cable for EDI:- 1No

Control motor cable:- 1 No . (13)Eye Hook:- 1 No .

Dust Cover:- 1 No

TECHNICAL DETAIL

Cast Iron, for 150mm Cube with ISI Certification IS:10086

Angle between adjacent interior faces and between interior faces and top and bottom plates of mould-90+/-0.5Deg

length of base plate -Min. 280mm

Width of base plate -Min. 215mm

Machined flat to +/- 0.02 mm of accuracy and finished to within +/- 0.2 mm of specified dimensions. Approx wt minimum to14kg