Universal Testing Machine Computerized, Capacity, 1000 KN,

6 pillar type with Hydraulic Jaws

Resolution:- 0.01KN

Frame Stiffness:- 2100Kn/mm

Connector:- Electrical Connector MIL Standard

Daylight :-700mm

Column diameter:- 80mm

Material of construction of column:- Chrome steel

Max clearance for tensile testing :- 50-650mm

Max clearance for compression testing:- 0-600mm

Clearance between columns :-650mm

Ram stroke:- 250mm

Straining /piston speed at no load:- 0-50mm/min

For Tension test:-Clamping jaws for round specimens:- 8-

16mm,20-40mm,40-60mm

Clamping jaws for flats specimens thickness:-0-40mm

Flat specimens width:-70mm

For Compression test:- Pair of compression plates dia of circular platen

For Transverse test:- Table with the adjustable rollers

Width of rollers:- 140mm, Diameter of rollers:-50mm

Max clearance between support:- 600mm

Radius of punch tops:-16mm,22mm

Cross head geared motor:- 0.37kW

Power Pack Motor:-2.2kW

Weight:- 3.5Ton

4 quick load change options 60, 100,(HRA, HRB, HRC) and 187.5 kgf

Direct reading of Rockwell scales HR - A,B,C.

Samples size upto 230 mm high & 155mm Throat

Rockwell - 10 kgf Pre Load / 60, 100, 150 kgf

Brinell - 10 kgf Pre Load / 187.5 kgf

Display - Analogue. Conforms to IS 1586 - 2000

Specimen accommodations: Vertical space - 230mm

Horizontal space (from central line) - 155mm

Rotating type beam, size of specimen: 8 mm dia, rotation of 4200 rpm.

A complete cycle of reversed stresses in each revolution is recorded.

Total number of revolutions recorded using digital counter.

As per the requirements of IS 5075-1959.

Max. Bending Moment:- 2 Nm Bending Moment adjustable:- 2.5-20 Nm,

Range-I 2.5-12.5 Nm/Range-II 12.5- 20.0 Nm, Gripping dia of specimen:- 12mm

Testing dia of specimen:- 8 mm Accuracy of applied bending moment:- min. ± 1 %

Digital Counter Power required:- 0.5 HP

Power Supply:- 3 phase, 440 V, 50 Hz, A.C

As per the IS: 10045-1993,

Initial potential energy (joules) :- 300/170

Minimum scale graduation :- 2/2

Min Pendulum drop angle (Degree):- 140/90

Min Impact velocity (m/sec):- 5.308/3.994

Min length of pendulum (mm):- 813.5/813.5

Effective weight of pendulum (kg) :-21.300 /21.300

Min potential energy) :-0.5%/0.5%

Angle at tip (Degree) :-30/75

Radius of curvature (mm):- 2/0.7

Width of tip (mm) :-18

Distance between supports (mm) :- 40

Radius of curvature at edge (mm) :-1 to 1.5 (CHARPY)

Net Wight (kg) approx 425.

Charpy Striker :- 1

Izod striker :- 1

Block :- 1

Specimen setting Gauges :- 2, spanners :- 1 Set