TECHNICAL SPECIFICATION

In an upright microscope, the source of transmitted light and the condenser are located below the stage, pointing up. The objectives are placed on top of the stage, pointing down. The specimen is observed from the top through the lid of a petri dish or a coverslip.

Body - Trinocular Head inclined at 45°.

Focussing - Both side co-axial focussing knobs.

Nosepiece - Quadruple revolving nosepiece with accurate centering & positive click stops.

Stage - Large Co-axial Mechanical Stage for X-Y movement of specimens.

Illumination - Bright field vertical illuminator 6V-20W Halogen with field diaphragm, filter slots

and bulb centering mechanism.

Objectives - Achromatic DIN M4X-M10X & M40X.

Eyepieces - WF10X-H16X

Observation Method: Bright field

Objective/Nosepiece: Quadruple

Objective Magnification: 2.5x, 5x, 10x, 20X, 50x

Observation Tube Type: Binocular Tube

Light Filter: Blue

Eyepiece Magnification: With 10x magnification

Field of View: 20 mm

Viewing Head Inclination: 45 degree

Features of Optics/Lens: Polarizer & rotatable Analyser slider

Scanning Stage Type: Motorized - 2 axis Stage

Minimum X-Axis Travel Length (in mm): 75 millimeter

Minimum Y-Axis Travel Length (in mm): 40 millimeter

Minimum Z-Axis/Focus Travel Length (in mm): 10 millimeter

Accuracy of XY-Stage: +/-5 µm

Repeatability of XY-Stage: <2 µm

Resolution of XY-Stage: 0.1 μm

Resolution of Focus: <=10 nm

Accuracy of Focus: GOOD

Repeatability of Focus: GOOD

Motorized Stage Control: Through PC Software

Power Supply: 100 - 240 VAC, 50-60 Hz

Instruction manual will be provided along with the apparatus.

TECHNICAL SPECIFICATION

A weighing balance is a device that measures the weight or mass of an object. Weighing balances are used in laboratories, pharmacies, 

Capacity: 220g

Graphic display: coloured

Display size: 5.7 inch

Response time: 5 second

Weighing pan, mm: 40x40 or better

Eccentricity deviation (sd) (test load): 0.1mg (100g)

Capacity: 220g

Linearity deviation, mg: 0.2

Sensitivity offset, nominal load, mg: 0.01

Repeatability, mg: 0.01

Readability: 0.1mg/0.01mg

Operating temperature: 5 to <50 °c

Frequency (hertz): 50-60

Voltage (volt): 110-220

Display type: LCD

Instruction manual will be provided along with the apparatus.

TECHNICAL SPECIFICATION

Probe Tip diameter: 3mm

Extra Titanium probe diameter in mm: 12-25

Variable processing time, range (second): 60

Variable probe tip amplitude range (in micron): 0.25

Weight: 4 kilogram

No. of replaceable tip included in the offer: 1

Additional Items: Titanium, probe, sound enclosure box

Working temperature range (in Deg. C): 35

Replaceable tip: Slots or flats cut over it

Power: 650 Watt

Variable Frequency (Khz): 25

Fixed Frequency (kHz): 20

Manual will be provided .

Horse power of motor provided: 0.5

Type: Double disc

Number of AC motors: 2

Grinding and polishing Disc diameter: 200 millimeter

Width of machine: 660mm

Height of machine: 310mm

Length of machine: 710mm

Body material: Mild Steel

Digital RPM Display: Yes

Speed variable adjustment knob: Yes

Maximum Variable speed (RPM): 1000

Input power: 350 Watt

Power supply: 230 Volt

Minimum Variable speed (RPM): 55

TECHNICAL SPECIFICATION

Detector Type: Standard detectors

Measurement range (X-axis): 17.5 millimeter

Measurement range (Z-axis Detector in micrometer): 360 micrometer (-200 micrometer to +160

micrometer)

Measuring Speed (Measuring in mm/s): 0.25, 0.5,0.75

Measuring Speed (Returning in mm/s): 1

Display: LCD (Digital)

Power Source: Rechargeable Battery

Battery Type: Inbuilt rechargeable battery

Battery Chemistry, if Rechargeable Battery: Li-Ion

Battery Capacity (mAh): 5000

Charging time(Hour): 3

Number of Batteries required for operation: 1

Number of Batteries supplied: 1

suitable AC adaptor/charger provided: Yes Manual will be provided.